anko KE3046-SA Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Czajnik anko KE3046-SA. anko KE3046-SA 7 stron.

re-boil the water again

wait for 30 seconds. This will allow the thermostat to reset, before

pressing the power switch again to re-boil the water. You may shut OFF power to the kettle

by just lifting the kettle from the power base at any time to stop the boiling process.

NOTE: Ensure that switch is free of obstructions and the lid is firmly closed. The kettle will

not turn OFF if the switch is constrained or if the lid is opened.

5. Lift the kettle from the power base and then pour the water carefully.

NOTE: Proceed with caution when pouring the water from your kettle as boiling water may

result in scalding. It is important not to open the lid while the water in the kettle is hot.

6. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on

the power base when not in use.

NOTE: Always disconnect from mains power outlet socket when not in use.

BOIL-DRY PROTECTION

Should you accidentally let the kettle operate without water, the boil-dry protection circuit

will automatically switch OFF power to the kettle. If this occurs, allow the kettle to cool

down for few minutes prior to filling with cold water.

Always disconnect the appliance from the mains power outlet and allow it to cool down

completely before cleaning.

1. Never immerse the kettle body, power cord or power base in water, or allow moisture to

come in contact with these parts.

2. Wipe the kettle body with a damp cloth, never use abrasive cleaners.

CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of

the kettle to prevent damage to the glossy surface.

3. When not in use or during storage, the power cord should be wound under the power base.

Your kettle should be periodically descaled as the mineral deposits in tap water may form

scale on the bottom of kettle and this may cause it to operate less efficiently. You can use

commercially available descaling solution by following the instructions supplied with the