anko 42949244 Podręcznik - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik dla Głośniki anko 42949244. anko 42949244 6 stron. Bluetooth party speaker

Drukuj stronę

Function Instructions

USB Operation

This unit has a USB port for play back MP3 music.

Insert your USB device into the USB port and the unit will start playing automatically.

Press the [MODE] button to USB mode is selected.

Press the

key to the previous or next track.

Press the

button to play or pause music

Press

button on the remote to repeat the current track, press it again to repeat all

tracks.

FM Operation

This speaker supports FM radio function.

1.This speaker has built-in antenna, no need to insert FM antenna.

2.Press [ MODE ] button on the rear panel or on the remote control repeatedly until FM

function is selected.

3.Short press button on the top panel to search the FM radio station automatically.

4.Press

to select the previous or next FM radio station.

Bluetooth function

1.Press [ MODE ] button on the top panel switch to the Bluetooth mode if the speaker on

other mode, there is a prompt sound.

2.Once on the Bluetooth mode," bLUE " will keep ﬂashing on the display screen.

3.Open the Bluetooth funciton of the external device and search the Bluetooth device name

"42949244 " to pair.

4.Press connect to "PAIR" with the speaker.

5.Once connected, " bLUE " will keep static on the display screen and can hear a prompt

sound, you can play the music with the speaker.

6.You can use

button or

button on the rear panel or on the remote to control the songs

of the external device.

TWS Connecting

This speaker supports TWS pairing function, please buy two same speaker to enjoy this

function.

1.Turn on the Bluetooth function of the one speaker, connected the bluetooth and playing

music.

2.Long press MODE button on the rear function panel to open the TWS function, "

will short display on the screen.

3.Turn on the bluetooth of another speaker and " bLUE " will keep ﬂashing on the screen,

then long press [ MODE ] button of this speaker to open the TWS function, "

short display on the screen and "bLUE " will keep static.

4.Both speakers' TWS will pair automatically if above operation correct. Once TWS paired

successully, " bLUE " of both speaker will keep static.

5.Turn the volume knob on the function panel of any speaker increase or decrease the

music volume. 6.If not using the TWS function, please long press [ MODE ] to

deconnected TWS, "

" will short show on the display screen, and " bLUE " will keep

ﬂashing on another speaker.

Function Instructions

Connect with AUX in

1.Press [ MODE ] button on the rear function panel to switch to the Line in mode," AUH " will

be displayed on the screen.

2.Connect this speaker Line in input jack and the device Earphone jack by provided Line in

cable (supplied in the accessories)

3.Once connected,turn on your external device and play music.

Caution: Please turn off the unit before connect AUX cable in order to avoiding unexpected

noise.

Microphone REC Function

1.Before recording, please make sure the speaker insert a USB driver to save the record ﬁle.

2.When playing music, insert the microphone and long press REC button on the top panel to

turn on the recording function and the display will show "

record the sound from the microhone to USB driver, you can speak any words or sing.

3.Short press REC button to stop the recoding and the recorded sound from the USB driver.

4.Short press REC button again can withdraw the playing record mode and back to USB

playing mode.

Note:Recording function only record the voice from microphone input.

Bluetooth and AUX input are not recorded.

PRI(Priority) Function

1.When playing music, long press PRI button on the top panel to turn on the weakening of

human vocal from the music , the display will show "

" will

2.Long press PRI button again to turn off the weakening of human vocal from the music , the

display will show "

3.Short press PRI button on the top panel to turn on the microphone priority function, the

display will show "

3.Short press PRI button on the top panel to turn off the microphone priority function, the

display will show "

", then the speaker will