anko BL1015-GS Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Blender anko BL1015-GS. anko BL1015-GS 12 stron.

FOR THE INITIAL USE

1. Unpack the appliance and place all parts on a horizontal surface.

2. Immerse the jar, jar lid, measuring cup and tamper in warm soapy water and rinse them and

dry. Never immerse motor unit in water for cleaning to prevent the risk of electric shock.

CAUTION: The blade is very sharp, please handle carefully.

3. For attaching jar, firstly place the jar lid and measuring cup into the jar. Ensure the jar lid and

measuring cup are placed tightly and properly with the jar. Then place the jar onto the jar

support pad and fix it onto the motor unit tightly. The blender is now ready for use.

NOTE:

1) Before assembling the jar, be sure the power cord is disconnected from mains power outlet,

and the power switch and the speed dial are both on the "OFF" and "STOP" positions.

2) The appliance will not operate if the jar is not assembled onto the motor unit properly.

3) Make sure all the parts are assembled properly.

OPERATION

IMPORTANT! Never leave the appliance unattended during use.

BLENDING

1. Place the appliance on the flat horizontal surface and make sure it is not connected to mains

power.

2. Prepare the ingredients for blending, i.e. carrots, cut them into cubes with a size of

15mm*15mm*15mm. Then remove the measuring cup and jar lid, and put the carrot cubes into

the jar. Usually certain amount of purified water has to be added to facilitate the smooth

running of the appliance. The proportion of the carrot and water is 2:3. The amount of mixture

should not exceed the max level mark as indicated on the jar. And then close the jar lid by

pushing down firmly on to the jug and fit the measuring cup.