anko BL9706-CB Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Blender anko BL9706-CB. anko BL9706-CB 8 stron.

After filling the glass jar with ingredients, place the lid with measuring cup

securely onto the glass jar.

Plug the product into a standard 220-240Va.c. electrical outlet.

Turn the Dial to "1" or "2" setting or hold the dial switch in "P" position.

CAUTION: Never operate the product empty.

WARNING! The maximum operating time is 1 minute. Allow it to rest for at

least 2 minutes before using it again. After 5 cycles of operation, cool down the

motor to room temperature. Allow to cool down for approx. 30 minutes before

using it again.

NOTE: If the blades are not operating smoothly, stop the product and add some

liquid, or reduce the contents in the glass jar.

To blend food for a short time, pulse operation can be selected by turning the dial

switch to "P" setting. Hold the dial switch at "P" setting for this function. To stop

blending, release the dial switch.

To use the ice crush function, hold the dial switch at "P" setting. Release the dial

switch to stop crushing.

IMPORTANT! Use ice cubes only approximately 2cm

in size.

Turn off the product by turning the dial to "0" position, and then unplug the

product from the mains power outlet.

WARNING: Always unplug the product from mains power when it is not in

use or when left unattended.

When the Blades have stopped turning, the glass jar can be removed from the

motor housing.

IMPORANT! To prevent premature wearing on the fly-wheel, remove the glass

jar from the motor housing only when the blades have come to a complete stop.