Ankom TDF23 Procedura serwisowa - Strona 5

Przeglądaj online lub pobierz pdf Procedura serwisowa dla Przyrządy pomiarowe Ankom TDF23. Ankom TDF23 9 stron. Paddle bar replacement

14.

Check the back stroke of the paddles.

Return the instrument to the upright position.

Using the depth gauge (provided in the new Paddle Bar

kit) with the Paddle Bar Assembly in the back stroke

position (this is its normal, at rest, position) rest the

squared-off end of the depth gauge against the bottom

edge of the #5 paddle.

Measure the distance from the bottom edge of this

paddle to the face of the orange gasket on Clamp Bar B.

This distance should be 10/32". If this distance is not

correct contact ANKOM Technology for instructions on

how to make an adjustment.

ANKOM Technology  2052 O'Neil Road  Email: [email protected] Phone: 315-986-8090  Fax: 315-986-8091

Paddle Bar Replacement

TDF

Depth

Gauge

10/32"

Distance

4/32" – 5/32"

Distance

TS021

Service Procedure

Revised: 01/24/2017

10/32"

Distance

pg. 5 of 9