ANLIDAR MYTORQ MYBT-AS0212 Instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Wkrętak sieciowy ANLIDAR MYTORQ MYBT-AS0212. ANLIDAR MYTORQ MYBT-AS0212 13 stron. Automatic industrial cordless brushless power torque screwdrivers
Drukuj stronę(7)
OK/NG/Power/Hi&Lo Indicating Light Explanation
Protection Explanation: The indicating LEDS will show Hi/Lo when push Forward/Reverse lever
to the middle position. Speed can't be adjusted when temperature protection is activated.
Please wait until temperature protection is deactivated.
Signal Indicator
Sound Judgment
Signal
Indicator
Running
Stop
Beep Sound
7-1 Low Battery Protection: When it reaches a low battery, the red indicating light flashes and
beep sounds continuously until the battery is no power and screwdriver is stops working, the
indicating light flashes ON/OFF and beep sounds 2 short 1 long. It won't detect the battery
power when the motor and PCB temperature protection are activated.
7-2 Temperature Protection: The red indicating light flashes and beep sounds 9 times.
7-3 Sleep & Power Saving Mode: It will enter sleep mode when the screwdriver stopped for about
5 seconds, press the lever can wake up sleep. The power will be cut off when sleep more than
24 seconds, press the switch can restore power.
Release
Start
switch to
stop running
Hi
Lo
Hi
No
No
red
lights
lights
No
No
blue
lights
lights
No
1 short
Screw
reaches set
torque
Lo
Hi
Lo
red
green
green
No
blue
blue
lights
NO
8
Current
Screw NG
Protection
Hi
Lo
Hi
red
red
red
No
No
blue
lights
lights
3 short
6 short
Lo
red
blue