Becom BE-ART Series Instrukcja instalacji i obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Urządzenia kuchenne Becom BE-ART Series. Becom BE-ART Series 11 stron. Twin arm kneading machine
Drukuj stronę
1. General information
The BE-ART Series twin arm kneading machines mix dough by simulating the movement of human hands,
creating a perfectly oxygenated product without heating the dough. The kneading, lifting, stretching, and pulling
process is perfect for gluten development and provides maximum water absorption. These machines are
designed to knead soft dough (90% hydration) up to medium-firm dough (50% minimum hydration) and the
rapid leavening process produces a light and well-leavened product. A graduated knob adjusts arm strokes from
30 RPM to 70 RPM and a timer is used for consistent cycle times between speed 1 and speed 2. The BE-ART
Series machines and are great for bakery, confectionary, and pizzeria facilities.
1.1 Behavior
Having a good knowledge of the instructions in this manual is important for drawing maximum profit from
machine use and is essential for your safety. Each operator must read and understand the whole user and
maintenance manual before starting to use this machine.
If any part of this manual is not clear, immediately contact the manufacturer before starting to use the machine.
If you have any problems with machine operation, contact the manufacturer directly and quickly: a staff of
technicians is available for any problems regarding operation and production. Specify the model and serial
number in each communication that refers to this machine.
1.2 Caution
-
Do not use the machine if under the influence of alcohol, drugs or medicines that can alter your physical
condition.
-
Keep hair and other body parts away from the rotating pieces, belts and gears
-
Keep the danger and safety information signs clean and in order.
2. General points
2.1 Machine identification
Information about the machine can be found on the serial number plate.
© BEcom Sales (2020-02)
BE-ART
Page 2