247Security mDVR618 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR 247Security mDVR618. 247Security mDVR618 14 stron.

1. DVR AND CAMERA PLACEMENT

DVR

The first step is to determine the most appropriate location for the DVR and cameras. Mounting locations will vary

depending on the bus style, body manufacturer and bus year. Mounting orientation can be horizontal, vertical, or at

angles for spatial consideration. Mount the DVR through the affixed mounting base and ensure there is sufficient

space in front and around the DVR for easy removal of the hard drive—approximately 7 inches, to open the door.

Recommended installation locations include: inside the front bulkhead, behind the driver's mirror, or on top of or

under the dashboard.

CAMERAS

When mounting the front camera, ensure the camera is centered on the ceiling of the bus, nearest to the front

bulkhead—or nearest to the ceiling if mounted on the bulkhead—as is convenient to avoid being a headroom hazard

to occupants. Avoid installing cameras to sections of the ceiling that are exposed to, or are leaking, water.

2. CABLES

All cables for the installation and maintenance of your DVR system are included and consist of the following:

Cables for Installation

Camera Cable

GPS Antenna

Event Marker

Power Cable

Digital I/O Cable

(602W ONLY)

(One per Camera)

Auxiliary Equipment for Service

USB Memory Stick

Crossover Ethernet Cable

USB 2.0 A-to-MiniB Cable

Camera-to-RCA Adapter

(Optional)

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com