Absolare Hybrid Mono Amplifier Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Absolare Hybrid Mono Amplifier. Absolare Hybrid Mono Amplifier 12 stron.

1. General Description

The Absolare Hybrid Mono Amplifier is a tube input, solid state output, hybrid design

monoblock power amplifier, supplied in matched pairs for stereo amplification. The

single ended tube input section is inspired by the Absolare Preamplifier using two

12AU7/ECC82 (or compatible) tubes. The output section is all solid-state.

- Be sure the voltage setting of the unit matches the applied voltage to power

input. Operating voltage is fixed and must only be changed by an authorized service

agent.

- Do not connect unbalanced subwoofer input terminals to speaker outputs!

Absolare Hybrid Mono Amplifier has a balanced output stage. Neither of the speaker

output terminals should be connected to ground. Doing so may permanently damage

the amplifier. Please consult your dealer about correct subwoofer connection.

- Do not short circuit the speaker terminals. The output is protected for short

circuits, but speaker damage may occur from electrical pulses when the connectors

touch each other.

- Do not touch tubes while operating. Tubes are extremely hot devices and

contain very high voltages.

- Do not open bottom covers. There are no user serviceable parts inside the units..

ABSOLARE Hybrid Mono Amplifier User Manual 1.2