Absolare Push-Pull Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Absolare Push-Pull. Absolare Push-Pull 15 stron.
Również dla Absolare Push-Pull: Podręcznik użytkownika (14 strony)
Drukuj stronę3. Unpacking and Placement
Each monoblock amplifier comes in a separate box.
After opening the top cover of each box, remove the upper layer of hard foam
material. You can then lift each Amplifier from its box cradling them with the cloth
that is underneath the chassis. Retain the cloth and all packing materials for future
use.
Each Push-Pull Mono Amplifier may become very hot during operation. You should
always place them on support feet and leave at least 2 inches (5 cm) clearance
above each Amplifier to allow sufficient ventilation.
Each Push-Pull Mono Amplifier is designed to be supported by separate support
feet. They do not have support feet fixed in place. Feet can affect the sound quality
significantly. Feet must be positioned underneath each unit in direct contact with the
aluminum base plate – not the leather clad MDF covers. There are three areas
where the aluminum base plate is exposed through openings in the leather clad MDF
bottom plate. You can use either three or four feet.
After each Amplifier has been placed in its final position, it can be lifted in turn to
locate the support feet – firstly lifting the back (for 2 feet) and then the front (for 1 or
2 feet) to be placed underneath the chassis. Adjusting their position will also affect
the sound to varying degrees, depending on the type of rack, location or interaction
with other equipment. For the most situations, the arrangement as shown in the
diagram below is a good starting point.
5
ABSOLARE Push-Pull Mono Amplifier User Manual 1.2