Anolis ArcSource 140 COB Recessed Instrukcje użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Sprzęt dla DJ-ów Anolis ArcSource 140 COB Recessed. Anolis ArcSource 140 COB Recessed 6 stron.

Drukuj stronę

12. Sotware update

The following are required in order to update software:

- PC running Windows /XP/7/8/10 or Linux

- Software Uploader

- Robe Universal Interface

To update software in the fixture:

I. Installation of the Software Uploader.

1.The Software Uploader program is available from the Anolis web site at WWW.anolis.cz.

2. Download the software to your PC.

II.Fixture software updating.

1.Connect the Robe Universal Interface to the PC and to the DMX input of the fixture.

2. Switch the fixture to the update mode by moving the DIP 12 from the OFF position to the ON position.

Note: The Dip 12 must go from OFF to ON position to switch the fixture to the update mode.

3. Run the Software Uploader program. Select Robe Universal Interface from the COM ports and then

click on the Connect button.

4. If the connection is OK, click on the "Start Uploading button" to start uploading. It will take several

minutes to perform software update.

If the option "Incremental Update" is not checked, all processors will be updated (including

processors with the same software version).

If you wish to update only later version of processors, check the "Incremental Update" box.

Avoid interrupting the process. Update status is displayed in the Info Box window.

When the update is finished, the line with the text "The fixture is successfully updated" will appear in

this window.

Version 1.9 US

June 16, 2017

Specifications are subject to change without notice.