Anolis arcpower smartwhite 72 Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprawa oświetleniowa Anolis arcpower smartwhite 72. Anolis arcpower smartwhite 72 20 stron.

Drukuj stronę
Programming procedure:
1. Enter "EdI." menu
2. Press [UP] or [DOWN] to select the desired program which you wish to edit and press [ENTER].
3. Press [UP] or [DOWN] to select the desired program step ("S.01" - "S.30") and press [ENTER].
4. Press [UP] or [DOWN] to select the desired item and press [ENTER]-button.Now you can edit by using [UP]
or [DOWN] buttons the DMX values selected item (the list of items depends on selected DMX mode):
End. - a total number of the program steps (value 1-30).This value you must set before start programming(e.
g. if you want to create program with 10 steps,set End=10).
VAr- a warm white LEDs 1 saturation, value 0-255
COL- a cool white LEDs 1 saturation, value 0-255
Following item are common for all zones:
Str.
- a strobe,value 0-255
dim.
- a dimmer,value 0-255
FA.t.
- fade time,value 0-255*
S.tI.
- standing time,value 0-255*
COP.
- copying the current prog. step to the next prog. step.
Press [ENTER]-button to confirm adjusted value.
5. Repeat steps 3 and 4 for next prog. step. If you want to copy current program step to the next prog. step,
select option „COP." and confirm it by pressing [ENTER].
*Both Fade time and Standing time use the same conversion table in order to convert DMX value to the time
value:
DMX
Time
[sec.]
1
0.1
2
0.4
5
2.5
10
10
15
22.5
20
40
25
62.5
30
90
35
122.5
40
160
45
202.5
Exact expression of the time value follows the formula: time[sec.]=(DMX value)

8.3 Manual mode

This menu gives access to the control of the fixture channels by means of the control buttons.
Use [UP] and [DOWN] buttons until the display shows "MAn." menu.Press [ENTER] button and by using [UP]
and [DOWN] buttons select desired effect,press [ENTER] and and by using [UP] and [DOWN] buttons adjust
desired DMX value for selected effect.Confirm by [ENTER].
VAr- a warm white LEDs 1 saturation, value 0-255
COL- a cool white LEDs 1 saturation, value 0-255
Str.- a strobe, value 0-255
dim.- a dimmer, value 0-255
The list of items depends on the DMX mode that has been choosen,.

8.4 Test sequences

Use the item to run a special demo-test sequences without an external controller,which will show you some
possibilities of using the fixture.
DMX
Time
DMX
[min.]
50
4.2
105
55
110
5
60
115
6
65
120
7
70
125
8.2
75
130
9.4
80
135
10.7
85
12
140
90
13.5
145
95
15
150
100
16.7
155
VA2- a warm white LEDs 2 saturation, value 0-255
CO2- a cool white LEDs 2 saturation, value 0-255
Time
DMX
[min.]
18.4
160
165
20.2
170
22
175
24
180
26
185
28.2
190
30.4
32.7
195
35
200
37.5
205
40
210
VA2- a warm white LEDs 2 saturation, value 0-255
CO2- a cool white LEDs 2 saturation, value 0-255
14
Time
DMX
Time
[min.]
[min.]
42.7
215
220
45.4
80.7
225
48.2
84.4
230
51
88.2
235
54
240
57
245
60.2
63.4
250
66.7
255
70
73.5
/10.
2
77
92
96
100
104
108