Anolis ArcSource Outdoor 4 MC Instrukcje użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Oprawa oświetleniowa Anolis ArcSource Outdoor 4 MC. Anolis ArcSource Outdoor 4 MC 8 stron.
Również dla Anolis ArcSource Outdoor 4 MC: Instrukcje użytkownika (8 strony)
Drukuj stronęLand spike Land spike 3 ASO 4 MC 500mm
1. Hammer the sharp part (1) of the land spike into ground
(hammer the centre of the sharp part, not the edge).
2. Screw the threaded bar (2) into the sharp part (1) and
secure it with the socket head M5x5 (3).
3 .Put the cover (4) on the threaded bar (2).
4. Put the pipe 36.5mm (5) on the threaded bar (2).
5. Put the cable holders (6) on the threaded bar (2).
6. Put the pipe 198mm (7) on the threaded bar (2).
7. Put the ArcSources holder (8) on the threaded bar (2).
8. Put the pipe 198mm (7) on the threaded bar (2).
9. Put the cable holder (6) on the threaded bar (2).
10. Screw the nut with holder (9) on the threaded bar (2).
11. Screw ArcSources Outdoor 4 MC on the ArcSources
holders (8,9).
(Use the socket head M5x14 from the ArcSource Outdoors
4 MC to screw them to the holder (8)).
12. Pass the cable throw the cable holders (6).
Version 1.6 CE/cETLus
February 27, 2014
Specifications are subject to change without notice.
8