Anolis ArcPower 72/K2 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie Anolis ArcPower 72/K2. Anolis ArcPower 72/K2 20 stron.

installed following the manufacturer´s instructions.The earth has to be connected!

Cord plug connections:

Cable

Brown

Light blue

Yellow/Green

This device falls under protection class I.Therefore the ArcPower 72/K2 has to be

connected to a mains socket outlet with a protective earthing connection.

4.2.Mounting the ArcPower 72/K2

The ArcPower 72/K2 should be be placed on a non-f lammable f lat surface in any orientation and fixed by the

4 screws.There are 4 mounting holes of diameter 5 mm in housing of the driver. Ensure that instalation place

is enough ventilated.

Flat surface

1.The adapter cable RJ45/XLR connects the ArcPower 7/K to the DMX controller.If your DMX controller has

RJ45 socket for DMX output,use RJ45 patch cable for connection with the ArcPower 7/K.

RJ45 plug

View facing pins

Pin 1: Not used

Pin 2: Not used

Pin 3: Not used

Pin 4: Not used

Pin 5: Not used

Pin 6: Data +

Pin 7: Data -

Pin 8: GND

International

Live

Neutral

Earth

Screws

Mounting hole

DMX 512 XLR plug (male)

Front view of the plug

Pin 1: GND

Pin 2: Data -

Pin 3: Data +

Pin 4: Not used

Pin 5: Not used