Anolis ArcPad 3-48 Instrukcje użytkownika
Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Oświetlenie zewnętrzne Anolis ArcPad 3-48. Anolis ArcPad 3-48 2 stron.
The product generates colored light by means of Luxeon LEDs.The product was designed for exterior use
and it is ideal for locations where the effect lighting is required.
1.Attention:
During the operation the housing becomes hot (up to 85°C)
Do not install the module near high inflammable liquids or materials
Do not allow anything to rest on the module
Do not install the module near the naked flames
The unit is not suitable for underwater installation
Do not install the module in dirty,dusty or badly ventilated location
Avoid using the unit in locations subject to possible impacts.
Avoid looking directly into the LED light beam at close range.
2.Installation
The ArcPpad 3•48 should be connected to the ArcPower 48 driver. See the ArcPower 48 user manual for full
details of mains power requirements and DMX operation.
The ArcPpad 3•48 unit can be arranged in any position orientation.The ArcPpad 3•48 body is mounted on a
adjustable bracket for "tilt" adjustment in many positions.
Connect the ArcPad 3•48 ´s cable directly to the ArcPower 48 or use suitable cable joint box (weather-tight
for outdoor installation) if the cable has to be extended.The power/data cable that connect the ArcPad 3•48 to
the ArcPower48 has the following wiring:
3.Technical specifications:
Maximum Power Consumption:
Comp. Power Supply:
Operating Ambient Temp.Range:
Cooling System:
Led device:
Number of LEDs
Optical System:
Typical Lumen Maintenance:
Led Life Expectancy:
Operating Temperature:
User instructions
ArcPad 3•48
Pin
Colour of wire
White/orange
2
Orange
3
White/green
4
Blue
5
White/blue
6
Green
7
White/brown
8
Brown
RJ45 plug
(View facing pins)
60 W
ArcPower 48
-20°C/+40°C
convection
Luxeon Rebel
48
25° lens-array
70%@ 60,000 hours
minimum 60,000 hours
+70°C@ambient 25°C
LED
Red LED +
Green LED +
Blue LED +
White LED +
Red LED -
Green LED -
Blue LED -
White LED -