Dryflow BulletDri Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Suszarka Dryflow BulletDri. Dryflow BulletDri 12 stron.

BEFORE INSTALLATION

Installation must be carried out in accordance with the current edition of the local wiring regulations

code having jurisdiction. Installation should be performed only by a qualified electrician.

Hand dryer is to be installed with hardwired

stub provided in advance of install by others.

See MT for complete reference to mounting

heights and power KO locations.

INSTALLATION

1. Make sure power supply breaker is switched off. Installation must adhere to the regulations of the

current edition of the local wiring code having jurisdiction. Installation should be performed only

by a qualified electrician.

2. Place template against wall at desired height (see mounting height recommendations on MT) and

mark locations of four(4) mounting holes and wire service entry at knockout (KO) location.

Note: For two(2) or more dryers units, units should be no closer than 610MM[24"] on centers.

3. Remove and retain 2 cover screws and cover.

4. a. For in-wall (concealed) power supply-

Provide supply wire to KO location according to local code and attach securely to chassis at KO

with appropriate strain relief connector (not supplied).

b. For surface Mounted Conduit (exposed) power supply -

Provide appropriate conduit to entry location accordingly to local code and attach securely to

chassis with correct strain relief connector (not supplied).

71MM[2-51/64"]

98MM

[3-55/64"]

1200MM

[47 1/4"]

Recommended

1200MM

[39 3/8"]

L Min. = 300MM[11-13/16"]

230V/6A

It is recommended to avoid installation

of dryer near high reflective objects

(mirror, stainless steel washbasins, etc.)

in order to avoid faulty function of the

presence sensor.