Dryflow JJ02 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Suszarka Dryflow JJ02. Dryflow JJ02 12 stron. Jet force junior hand dryer

BASIC USE

Operation without touching,

place your hands at drying

cavity to activate the device.

DIAGNOSTICS & REMEDIES

Hand dryer fails

to start

Hand dryer turns

on/off erratically

or not sensitive

enough

No hot air

Hand dryer

makes ticking

noise

Externally visible service

blue LED light guides

hands to air flow.

Ensure the breaker supplying the dryer is operational. If it is,

disconnect the power and remove the hand dryer cover.

Check all wire connections to make sure they are well fixed.

Turn on power and verify correct power at terminal block. If it does

not work then replace circuit board.

Ensure that there is no obstruction on or in front of the infrared sensor

zone. Clean any dirt off the sensor lens.

Try adjusting the sensitivity potentiometer on program board.

If it still does not work, replace circuit board and sensor board.

Check if the heat element switch is set for power on.

Check if the heat element is broken. If yes, replace with a new one.

Check the motor brush wear down condition. Replace them if worn

out or install a new motor.

Disconnect power, remove cover, check to make sure no object is

stuck in motor vents.

After 3 seconds without

detecting hands, the device

stops automatically.