DRYTREAT STAIN-PROOF ORIGINAL Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Food Saver DRYTREAT STAIN-PROOF ORIGINAL. DRYTREAT STAIN-PROOF ORIGINAL 15 stron. Impregnating breathable sealer for natural stone, tiles, pavers, concrete and grout

Drukuj stronę

STAIN-PROOF ORIGINAL™

ImPReGNATING bReAThAbLe SeALeR FOR NATuRAL STONe, TILeS, PAveRS, cONcReTe ANd GROuT.

•

Guards against surface water and oil staining

•

Treated surfaces become easier to clean and maintain and stay looking new longer

•

Protects against efflorescence, freeze-thaw damage and salt attack

•

Controls mould and mildew

•

Retains existing colour and finish

•

Suitable for indoor and outdoor use

•

15 year warranty*

FLAMMABLE LIQUID 3 • HIGHLY FLAMMABLE • KEEP OUT OF REACH OF CHILDREN

Read safety directions before opening

*A 15 YEAR PERFORMANCE WARRANTY is offered when product is applied by an Accredited

Applicator and surface is maintained regularly, as outlined in our warranty document. For your

nearest Accredited Applicator please visit our website at www.drytreat.com. Spills should still be

cleaned up immediately to minimise absorption.

hOW TO uSe:

1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to determine

the ease of application and desired results.

2. Ensure surfaces to be treated are dry, clean and free of residues.

3. DO NOT thin product.

4. Generously saturate the surface with STAIN-PROOF ORIGINAL™ using a low pressure hand spray,

a clean brush or lamb's wool applicator. Surface should have a mirror like 'wet' look for 3-5

seconds. Avoid contact with surrounding areas.

5. Allow the surface to become touch dry, waiting a minimum of 10 minutes, and repeat Step 4. Total

application rate is approximately one litre per two to 25 square metres (one quart per twenty to

250 sq.ft.), depending on surface absorption.

6. After the final coat allow the surface to become touch dry, waiting a minimum of 10 minutes, and

then polish with a clean dry white cloth to remove excess product, moistening cloth with STAIN-

PROOF ORIGINAL™ to ease polishing.

7. Use an organic solvent e.g. methylated spirits to clean equipment.

8. Sealer will NOT prevent surface etching, scuff marks or wear and may lighten or darken some

surfaces. STAIN-PROOF ORIGINAL™ will make the maintenance and cleaning of treated surfaces

much easier.

PRecAuTIONS: 1. Do not take internally. 2. Apply when surface temperature is between 5 - 35°C

(40 - 95°F). 3. Avoid moisture contact with the surface for six hours after application. 4. Protect

surrounding areas from over-spray. 5. Keep away from drains, plants, water and soil. Do not empty

into drains. 6. Use only in well ventilated areas. 7. Use a positive pressure respirator if ventilation

is inadequate. 8. Wear suitable solvent resistant gloves, protective clothing, safety goggles and an

organic vapour respirator during application. 9. Avoid applying in windy conditions. 10. Wash

hands thoroughly after applying.

STORAGe: Keep container tightly sealed in a cool, well ventilated place. It is recommended that this