247Security mDVR 500 Series Skrócona instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja instalacji dla Kamera bezpieczeństwa 247Security mDVR 500 Series. 247Security mDVR 500 Series 11 stron.
Drukuj stronę
1. DVR AND CAMERA PLACEMENT
DVR
The first step is to determine the most appropriate location for the DVR and cameras. Mounting locations will vary
depending on the bus style, body manufacturer and bus year. Mounting orientation can be horizontal, vertical, or at
angles for spatial consideration. Mount the DVR through the affixed mounting base and ensure there is sufficient
space in front and around the DVR for ventilation, free movement on the mounting plate and for easy removal of the
hard drive—approximately 7 inches. Recommended installation locations include: inside the front bulkhead, behind
the driver's mirror or other locations where moisture and possible tampering will be at a minimum.
CAMERAS
When mounting the front camera, ensure the camera is centered on the ceiling of the bus, nearest to the front
bulkhead—or nearest to the ceiling if mounted on the bulkhead—as is convenient to avoid being a headroom hazard
to occupants. Avoid installing cameras to sections of the ceiling that are exposed to, or are leaking, water.
2. CABLES
All cables for the installation and maintenance of your DVR system are included and consist of the following:
Cables for Installation
Camera Cable
GPS Receiver
Event Marker
Power Cable
Digital I/O Cable
Module (Optional)
(One per Camera)
Auxiliary Equipment for Service
USB Memory Stick
Crossover Ethernet Cable
USB 2.0 A-to-MiniB Cable
Camera-to-RCA Adapter
(Optional)
2