DS Produkte 06621 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oświetlenie zewnętrzne DS Produkte 06621. DS Produkte 06621 11 stron.

Drukuj stronę
EN
Changing the remote control battery
The battery for the remote control has already been inserted.
You only have to remove the transport guard.
pull
push
3. Place the battery compartment back in the remote control so
that it locks in place.
Use
Please note that the colour settings are mixed colours. For
this reason, the colour tints may exhibit minor deviations.
1. Connect the adapter to the port in the base of the lamp.
2. Insert the mains plug in a properly installed socket that is easily
accessible.
3. Turn on the lamp by pushing the button AN (on) on the remote
control or ☼ An/Aus (on/off) on the control panel of the lamp.
4. Select the desired colour. To do so, push the colour button (4)
fi rst and then the corresponding colour button on the remote
control.
5. You can also select the desired effect and push the
corresponding button (2, 3, 5) on the remote control or push
the button M (mode) on the control panel of the lamp several
times.
6. Set the desired colour brightness using the buttons to
increase / decrease the brightness on the remote control or
using the arrow buttons (˄ increase, ˅ decrease) on the control
panel.
7. Push the button AUS (off) on the remote control or push ☼ An/
Aus (on/off) on the control panel again to turn off the lamp.

Troubleshooting

If the product is not working properly, please check whether you
are able to rectify the problem yourself.
Do not attempt to repair a defective electrical product
yourself!
If the light does not switch on, check
•
whether the plugs on the lamp are properly connected.
•
whether the product is properly connected with the socket.
•
whether the socket is defective. Try another socket.
•
the fuse for your mains connection.
•
whether the battery in the remote control is empty.
Variations
Article number
wood look oak
05901
wood look brown
06625
wood look beech
05871
brass look
06621
chrome look
06594
white
07376
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
1. The battery compartment is
located on the narrow side of
the remote control. Pull it out as
shown.
2. Remove the empty battery
and insert a 3 V battery (type
CR2032). The positive terminal
must point upwards.
Model number
SL7376O
SL7376M
SL7376B
SL7376C
D6594
SL8025F
Customer Service / Importer:

Technical data

Colour temperature:
warm white:
daylight:
Voltage supply:
adapter input:
output:
lamp:
remote control:
Output:
Disposal
The packaging material is recyclable. Dispose of the
packaging in an environmentally-friendly manner and make
it available to the collection service for recyclable materials.
Dispose of the product in an environmentally-friendly
manner. It does not belong in the household garbage.
Dispose of it at a recycling centre for old electric and
electronic equipment.
Batteries and rechargeable batteries must be removed and
disposed of separately before disposing of the product.
To protect the environment, batteries and rechargeable
batteries may not be disposed of together with normal
household waste. Instead they must be turned in at
appropriate collection points.
All rights reserved.
approx. 3000 K
approx. 5500 K
100 – 240 V, 50/60 Hz
DC 12 V, 1 A
DC 12 V
3 V (1 x 3 V battery, type CR2032)
5 W
✆
+49 38851 314650 *)
Instructions
DLSL M DS V4 0518