Fox Electronics FX255 D3 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Fox Electronics FX255 D3. Fox Electronics FX255 D3 17 stron. Decoder/repeater

Drukuj stronę

INSTALLATION

Unpack the FX255 D3 decoder and check that the power and computer USB
or RS232 cable is removed before disposing of the box. (Recycle where possible)
1. Set the battery Select Switch to the internal battery position(down). The
FX255 D3 will power up on the internal backup battery.
2. Insert and tighten the antenna connector.
3.Connect the USB (or RS232) cable connector to the FX255 D3 Base and to an
available computer USB (or RS232) port. USB driver software must be loaded
onto the windows based software. Note Windows XP and older is not supported.
PGM
RS232
EXT
INT
PGM
RS232
EXT
INT
PGM
RS232
EXT
INT
5
USB
USB
USB