DS18 CANDY-X1B Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Subwoofer DS18 CANDY-X1B. DS18 CANDY-X1B 16 stron. Monoblock subwoofer / stereo full range class d amplifiers
Również dla DS18 CANDY-X1B: Instrukcja obsługi (3 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

INSTRUCTIONS FOR FUNCTIONS AND CONTROLS

candy-x4b

1. HIGH INPUT: High level input terminals.

2. LOW INPUT: CH1/CH2/CH3/CH4 inputs of the amplifier system. Preamplifier outputs of a source (head

unit) or of an external electronic crossover must be connected to them.

3. GAIN: Knob for volume adjusment.

4. BASS BOOST: The boost ranges from 0dB to 12dB

5. HPF: High pass frequency adjusting knob, the frequency ranges from 40 Hz to 250 Hz.

6. LPF: Low pass frequency adjusting knob, the frequency ranges from 40hz to250Hz.

7. X-OVER: Optional switches for high pass filter (HPF)/ full pass filter (FULL)/ low pass filter (LPF).

8. INDICATOR LIGHT: When power LED sends out blue light, it means that this amplifier have been

working now. When the LED sends out red light, it means that the self-protection of the amplifier.

9. GND: Ground terminal. Connect to the car chassis. Keep the lenght of the ground cable to a minimum.

10. REM: Terminal to be connected with the remote cable, which comes from the source and which

controls the amplifier switching on. Applied voltage must be between 10 and 15V DC.

11. +12V: anode of power connection terminals. Connect to the anode of car battery.

12. FUSE: standard automatic fuse, you must use the same power fuse if you need to change it.

13. SPEAKER: speaker connecting terminals.