Daintree GE Forum Frame IND739 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt oświetleniowy Daintree GE Forum Frame IND739. Daintree GE Forum Frame IND739 6 stron.

Drukuj stronę

Forum | Frame Series | Surface Mounting

Installation

Mount remote driver box to structure with in 50' from fixture. Run

wires from driver box to fixture.

Align fixture housing flush to ceiling or wall depending what has been

specified and secure through factory-drilled holes using screws (not

provided) appropriate for surface type.

Turn off the power to the fixture's circuit. 7/8" power feed hole is

provided for wiring to be fed into fixture.

COMPONENTS FOR SURFACE MOUNTING

The Frame series surface mounting system consists of four main

components: the housing (A), the geartray (B), the lens (C), the remote

drive box (D). These items come shipped with and attached to the

fixture to help ensure proper counts and clarification during assembly.

In preparation for installation, remove geartray (B) and lens (C) from

housing (A) and set aside in a safe area.

Connect geartray to fixture housing via provided electrical junction and

re-insert geartray and lens back into housing.

Installation Guide