Foxconn 661FXME Instrukcja łatwej instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja łatwej instalacji dla Płyta główna Foxconn 661FXME. Foxconn 661FXME 8 stron. 661fxme foxconn

1. Clear CMOS Jumper: CLS_CMOS

You can clear CMOS to restore default system

setting. To clear the CMOS, follow the procedures

described below.

1. Turn off the AC power and connect pin 1 and 2

together using the jumper cap.

2. Return the jumper setting to normal (pin 2 and

3 together with the jumper cap).

3. Turn the AC power supply back on.

2. CPU Model Selection Jumper: J2

The default status for J2 is open, which supports

the Prescott and Northwood CPU. If J2 set as

close, then it supports the Willamette CPU.

3. Front Panel Connector: FP1

Attach the power LED, IDE LED, reset switch and

power switch connectors to the corresponding

pins.

4. FAN Connectors: CPU_FAN, FAN1

Plug the CPU cooling fan cable into the 3-pin

CPU_FAN power supply on the mainboard. Con-

nect the case cooling fan connector to FAN1.

(Default)

IDE-LED+

IDE-LED-

RESET

Normal

(default)

Clear CMOS

CLS_CMOS

Open

PLED+

PLED-

GND

PWRBTN#

GND

EMPTY

FP1

SENSE

+12V

GND

CPU_FAN

GND

+12V

SENSE

FAN1