ANS MIDA-EVSE-PE32S Instrukcja obsługi produktu - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Ładowarka ANS MIDA-EVSE-PE32S. ANS MIDA-EVSE-PE32S 8 stron. 32a portable ev charger

Portable EV Charger (level 2)

CONNECTING

Step 1. Take out the charger and firmly insert the plug into socket-outlet.

Step 2. Pull cap lightly, completely plug the vehicle connector into your

vehicle inlet.

Step 3. Factory default current is 32A, please press the button of "CURRENT

SETTING" to adjust your required current. amperes to max. 32 ampere cycles.

The device will default to the last current setting when you charge next time.

Step 4. The device start charging automatically while the READY/CHARGE,

POWER indicators are all green.

Step 1. Disconnect the vehicle connector from the vehicle inlet.

Step 2. Close protective cap of vehicle inlet, put on the protective cap of

vehicle connector.

Step 3. Disconnect the plug from the socket-outlet.

Step 4. Pack up the EV charger cable and put into the bag.