DSC PC3000RK Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System bezpieczeństwa DSC PC3000RK. DSC PC3000RK 15 stron.
Drukuj stronę
Programming Access Codes
Up to 15 access codes in addition to the Master Code can be entered from the
keypad.
*
Press [
], [5] and [Master Code]. The "Program" light will flash and the zone lights
will show which codes have already been programmed. To enter a new code or
change an existing code, first press the code number [0][1] to [1][6] and then enter
your [4 digit] code. To erase a code, press [
*
Note that the [
Press [#] to return to Ready.
Quick-Arm Feature
When the Quick-Arm feature is enabled, the panel may be armed simply by entering
*
[
], [0] instead of a 4 digit code. The [
*
Enter [
], [6], [Master Code], [4] to turn ON and OFF the Quick-Arm feature. When
the command is entered, the keypad will beep 3 times if the feature is being enabled
and will sound one long beep if the feature is being disabled.
Press [#] to return to Ready.
Door Chime Feature
The door chime feature is used, while the panel is disarmed, to provide a tone from
the keypad each time a door or window is opened or closed. The doors and
windows which will provide this indication are programmed by your installer.
*
Enter [
], [6], [Master Code], [6] to turn the door chime feature ON and OFF. When
the command is entered, the keypad will beep 3 times if the feature is being enabled
and will sound one long beep if the feature is being disabled.
Press [#] to return to Ready.
Alarm Test
*
Enter [
], [6], [Master Code], [8] for a 2 second test of the keypad lights, keypad
sounder and alarm bells.
Press [#] to return to Ready.
] and [#] keys cannot be used in a code.
****
] instead of a [4 digit] code.
*
], [0] command will not disarm the panel.