DSC PC51O Instrukcja instalacji - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa DSC PC51O. DSC PC51O 20 stron. Pc51o
Również dla DSC PC51O: Instrukcja obsługi (16 strony)

PROGRAMMING WORKSHEET

[1]
Zone Definitions
NOTE: When defining zones, assign delay zones first, then assign the other types.
Default
0 0
0 1
0 2
0 2
[2]
System Times
Default
0 3 0
1 2 0
0 0 4
Valid entries are "001" to "255"; do not enter "000".
[3]
Installer's Code
Default
0 5 1 0
[4]
Programmable Output Options (PGM1 and PGM2 Terminals)
Enter two digits from the list below. The first digit entered determines how PGM1 will operate; the second
digit entered determines how PGM2 will operate.
Default
1 3
[5]
1st System Option Code
Default
OFF
ON
OFF
OFF
14
Page 10
Zone 1
Zone 2
Zone 3
Zone 4
Page 11
Entry Delay (seconds)
Exit Delay (seconds)
Bell Cut-off (minutes)
Page 11
Programmable Output
Valid entries are from 1 to 9.
Do not enter 0.
Page 12
Zone Light ON
Zone Light 1
Momentary Keyswitch Arming Maintained Keyswitch Arming
Zone Light 2
[P] Key silent
Zone Light 3
KEY Terminal: Tamper Zone
Zone Light 4
For Future Use
Digit 1
[0] Slow / Audible
[1] Slow / Silent
[2] Fast / Audible
[3] Fast / Silent
[1]
[
][7] activates PGM
[2]
Keypad sounder follow mode
[3]
Latched alarm
[4]
Steady Alarm / [P] Key
[5]
24-Hour Pulsed Alarm / [F] Key
[6]
PGM activates on [A] Key alarm
[7]
PGM activates on Trouble alarm
[8]
PGM activates on any [F], [A] or [P] Key alarm
[9]
Arm / Disarm Status
Digit 2
[0] Standard Delay
[1] Instant
[2] Interior
[3] Home-Away/Delay
[4] 24-Hour Steady Alarm
[5] 24-Hour Pulsed Alarm
Page 11
Zone Light OFF
[P] Key audible
KEY Terminal: Keyswitch Operation