DAITEM SH601AU Instrukcja instalacji - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa DAITEM SH601AU. DAITEM SH601AU 20 stron. Alarm pendant

Drukuj stronę

9. Advanced programming

9.1 "Comfort" type application

REMINDER: the push-button can also be reprogrammed to send "Comfort" type commands (green LED).
• General commands: using the table below, choose a command n° then programme the push-button using
the sequence described in step 3 of the chapter on "Main configuration operations"
Command description
Fire alarm
Door bell
Audible signal
Trigger disabled
• Commands from external receivers or remote-controlled sockets (also consult the manual for these products)
1. Using the table opposite, choose
a command n° and then configure
the push-button according to the
sequence described in step 3
of the chapter on "Main
configuration operations".
Each digit of the command n°
corresponds to the number of times
the push-button is pressed
(digit "0" = button pressed 10 times
in a row).
Command
Control panel response
n°
32
specific fire sounding: 5 min
38
ding dong
42
beep, beep, beep, beep
44
-
Command description
Light pulse (*)
Light toggle switch
Light timer
Relay 1 pulse (*)
Relay 1 toggle switch
Relay 1 timer
Relay 2 pulse (*)
Relay 2 toggle switch
(*) External receiver command only.
Command
n°
50
Relay 2 timer
56
Relay 3 pulse (*)
58
Relay 3 toggle switch
60
Relay 3 timer
66
Relay 4 pulse (*)
68
Relay 4 toggle switch
70
Relay 4 timer
76
17
Outdoor siren
Dialler
fire sounding:
fire transmission
5 min
no response
no response
no response
no response
-
Command description
-
Command
n°
78
80
86
88
90
96
98