DAITEM SH274AX Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Czujniki bezpieczeństwa DAITEM SH274AX. DAITEM SH274AX 13 stron. Contact detector
Również dla DAITEM SH274AX: Instrukcja instalacji (4 strony)

Drukuj stronę
GB
• check detection of protected
entrance opening and closing:
entrance
entrance
open:
the test LED
the test LED
indicator
indicator
lamp lights
lamp goes
up
Pressing on the button for more
than 1 sec. causes the control
panel to give a "Test" message
when the panel is in test or
installation mode.
closed:
out
"beep, test detector X,
group Y immediate
(or delayed or combined)"
)
)
)
)
)
64

6. Maintenance

6.1 Battery low indication

The control panel indicates when
the contact detector's battery is
low.
To check whether there is a
problem with the detector battery,
press on the detector's test
button.
If the test LED indicator lamp no
longer lights up, the lithium
battery should be replaced.