ansio 1041 Instrukcja instalacji i obsługi dla użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla użytkownika dla Wentylator ansio 1041. ansio 1041 6 stron. 9” black desk fan

Hold the rear grille with the handle facing upwards and insert it to the main fan body

through its centre. Make sure that the 3 prongs found at the top of the main fan body fit

into the 3 grooves found on top of the rear grille.

Use the lock nut of the grille provided and turn it clockwise to tighten and fix the rear grille.

Insert the spring Clip found at centre of the fan blade into the motor shaft and push it in

gently, so that the fan blades are firmly fixed to the main fan body assembly. Turn the fan

blades to ensure normal movement.

NOTE: You should hear a "hit" sound when the Spring clip is pushed in. This ensures firm

fixation.

Front and Rear Grille Attachment:

4a. Insert the Front grille to the groove of the positioning clip found at the bottom of the

rear grille. Align the front grille with the rear grille so that the hole on top of the front

grille aligns with the hole on top of the rear grille. Lock the positioning clip.

4b. Press down the two side buckles to fasten the front and rear grille. Use the metal nut

and screw to fix the front and the rear grille firmly using a Philips screw driver.

Base Installation:

Place the base flat on a horizontal surface and align the main body over the base. Press

down making sure that the stub at the base of the main body fits into the slot on the base.

The sides of the main body should click into the place on the base.

Customer Support - UK Toll Free 0800 080 6781 or +44 207 157 9795

P a g e

| 4

(Nov'21v.01)