ansio 1502 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Żelazo ansio 1502. ansio 1502 8 stron.

Note: Use Steam mainly for thicker fabrics or ones with stubborn wrinkles. To stop

steam flow, press steam button to its lowered position - this will also prevent water

from accidentally dripping during next use.

VOLTAGE SELECTOR SWITCH

The Voltage Selector is the recessed switch located at the back of the Steam iron,

which can be set to either 100-127V or 220-240V electrical voltage standards

based on the country where it is used. By default, the Voltage Selector is set to

220-240V.

The Steam Iron features dual-voltage functionality, which allows it to function

correctly in regions with either 100-127V or 220-240V electrical voltage standards.

Voltage is set using the Voltage Selector.

For use in the United Kingdom, Europe and most countries in Asia, the voltage

selector switch must be placed in the 220-240 Volt position. Countries in North

America, Japan, Taiwan, Venezuela, Colombia, Ecuador & Caribbean Islands, the

voltage selector must be placed in the 100-127 Volt position. For further

information,

visit

country.

NOTE: Make sure to CONFIRM the voltage available at each location before using

the iron.

IMPORTANT:

1. By default, the Voltage Selector is set to the 220-240V setting. Make sure to

select the correct voltage for your location before plugging power cord into an

electrical outlet.

2. Always use appropriate high-quality plug convertor. Using a low quality or an

inappropriate plug can be dangerous.

Contact Customer Support at 0800 080 6781 (Toll Free); +44 207 157 9795

ANSIO 1502

(Feb'23v01)

http://www.worldstandards.eu/electricity/plug-voltage-by-

Voltage Selector