FoxESS HV2600 Podręcznik użytkownika - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer FoxESS HV2600. FoxESS HV2600 20 stron. High voltage battery

7.6 System Start up

· When the grid connected system is started, the inverter should be turned on first to avoid the current

pulse of the inverter increasing to the battery pack.

· All installation and operation must comply with local electrical standards.

· Check all power cables and communication cables carefully.

Turn on the POWER switch

· Before starting, please dial DIP to the correct position. DIP represents the number of HV2600 in the

system. Please refer to the following table for details:

DIP position

The number of HV2600

· Turn on DC switch and press the POWER switch, all the light will light up, and the green and red

LED on the HV2600 module will light up for 1s at the same time, you will hear the sound of closing

and cutting off the relay in BMS BOX to prove that the system works normally.

Module address assignment

If the system is powered on for the first time, BMS will automatically assign the module address of

HV2600 without manual configuration.

There are two LED indicators on the front of the battery packs to show its operating status.

For HV2600

Green LED

Red LED

On for 1s

On for 4s

Off

On for 4s

Off

On for 4s

For BMS-BOX

- Alarm LED

BMS-BOX Condition

Error

Standby

Charge/Discharge

Batteries Status

Initial power on

Off

Work

Communication lost

Recoverable alarm

Unrecoverable Alarm

Green

Red

Off

Flash

Off