DSC HS2LCDWF v1.0 Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Keypad DSC HS2LCDWF v1.0. DSC HS2LCDWF v1.0 9 stron. Wireless keypad

Drukuj stronę

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual

property laws and treaties. The SOFTWARE PRODUCT is licensed, not sold.

GRANT OF LICENSE This EULA grants You the following rights:

(a) Software Installation and Use - For each license You acquire, You may have only one copy of the SOFTWARE PRODUCT

installed.

(b) Storage/Network Use - The SOFTWARE PRODUCT may not be installed, accessed, displayed, run, shared or used concurrently on

or from different computers, including a workstation, terminal or other digital electronic device ("Device"). In other words, if You have

several workstations, You will have to acquire a license for each workstation where the SOFTWARE will be used.

(c) Backup Copy - You may make back-up copies of the SOFTWARE PRODUCT, but You may only have one copy per license installed

at any given time. You may use the back-up copy solely for archival purposes. Except as expressly provided in this EULA, You may not

otherwise make copies of the SOFTWARE PRODUCT, including the printed materials accompanying the SOFTWARE.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS

(a) Limitations on Reverse Engineering, Decompilation and Disassembly - You may not reverse engineer, decompile, or

disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law

notwithstanding this limitation. You may not make any changes or modifications to the Software, without the written permission of an officer

of DSC. You may not remove any proprietary notices, marks or labels from the Software Product. You shall institute reasonable measures to

ensure compliance with the terms and conditions of this EULA.

(b) Separation of Components - The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not

be separated for use on more than one HARDWARE unit.

licensed with the HARDWARE as a single integrated product. In this case, the SOFTWARE PRODUCT may only be used with

the HARDWARE as set forth in this EULA.

(d) Rental - You may not rent, lease or lend the SOFTWARE PRODUCT. You may not make it available to others or post it on

a server or web site.

(e) Software Product Transfer - You may transfer all of Your rights under this EULA only as part of a permanent sale or

transfer of the HARDWARE, provided You retain no copies, You transfer all of the SOFTWARE PRODUCT (including all

component parts, the media and printed materials, any upgrades and this EULA), and provided the recipient agrees to the

terms of this EULA. If the SOFTWARE PRODUCT is an upgrade, any transfer must also include all prior versions of the

SOFTWARE PRODUCT.

(f)

Termination - Without prejudice to any other rights, DSC may terminate this EULA if You fail to comply with the terms

and conditions of this EULA. In such event, You must destroy all copies of the SOFTWARE PRODUCT and all of its component

parts.

Trademarks - This EULA does not grant You any rights in connection with any trademarks or service marks of DSC or its

suppliers.

3. COPYRIGHT - All title and intellectual property rights in and to the SOFTWARE PRODUCT (including but not limited to any

images, photographs, and text incorporated into the SOFTWARE PRODUCT), the accompanying printed materials, and any

copies of the SOFTWARE PRODUCT, are owned by DSC or its suppliers. You may not copy the printed materials

accompanying the SOFTWARE PRODUCT. All title and intellectual property rights in and to the content which may be

accessed through use of the SOFTWARE PRODUCT are the property of the respective content owner and may be protected by

applicable copyright or other intellectual property laws and treaties. This EULA grants You no rights to use such content. All

rights not expressly granted under this EULA are reserved by DSC and its suppliers.

4. EXPORT RESTRICTIONS - You agree that You will not export or re-export the SOFTWARE PRODUCT to any country, person,

or entity subject to Canadian export restrictions.

5. CHOICE OF LAW - This Software License Agreement is governed by the laws of the Province of Ontario, Canada.

6. ARBITRATION - All disputes arising in connection with this Agreement shall be determined by final and binding arbitration in

accordance with the Arbitration Act, and the parties agree to be bound by the arbitrator's decision. The place of arbitration shall

be Toronto, Canada, and the language of the arbitration shall be English.

7. LIMITED WARRANTY

(a) NO WARRANTY - DSC PROVIDES THE SOFTWARE "AS IS" WITHOUT WARRANTY. DSC DOES NOT WARRANT THAT THE

SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR

ERROR-FREE.

(b) CHANGES IN OPERATING ENVIRONMENT - DSC shall not be responsible for problems caused by changes in the

operating characteristics of the HARDWARE, or for problems in the interaction of the SOFTWARE PRODUCT with non-DSC-

SOFTWARE or HARDWARE PRODUCTS.

WARRANTIES OR CONDITIONS NOT STATED IN THIS LICENSE AGREEMENT, DSC'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS

LICENSE AGREEMENT SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU TO LICENSE THE SOFTWARE

PRODUCT AND FIVE CANADIAN DOLLARS (CAD$5.00). BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

(d) DISCLAIMER OF WARRANTIES - THIS WARRANTY CONTAINS THE ENTIRE WARRANTY AND SHALL BE IN LIEU OF ANY AND ALL

OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE) AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF DSC. DSC MAKES NO OTHER

WARRANTIES. DSC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON PURPORTING TO ACT ON ITS BEHALF TO MODIFY OR TO

CHANGE THIS WARRANTY, NOR TO ASSUME FOR IT ANY OTHER WARRANTY OR LIABILITY CONCERNING THIS SOFTWARE PRODUCT.

(e) EXCLUSIVE REMEDY AND LIMITATION OF WARRANTY - UNDER NO CIRCUMSTANCES SHALL DSC BE LIABLE FOR ANY

SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT,

NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF

PROFITS, LOSS OF THE SOFTWARE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE OR

REPLACEMENT EQUIPMENT, FACILITIES OR SERVICES, DOWN TIME, PURCHASERS TIME, THE CLAIMS OF THIRD PARTIES, INCLUDING

CUSTOMERS, AND INJURY TO PROPERTY. WARNING: DSC recommends that the entire system be completely tested on a

regular basis. However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical

disruption, it is possible for this SOFTWARE PRODUCT to fail to perform as expected.

FCC Compliance Statement

Caution: Changes or modifications not expressly approved by Digital Security Controls could void your authority to use this

equipment.

This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the

manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply

with the limits for Class B device in accordance with the specifications in Subpart "B" of Part 15 of FCC Rules, which are designed

to provide reasonable protection against such interference in any residential installation. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause interference to television or radio reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures: (i) Re-orient the receiving antenna; (ii) increase the separation between the equipment and receiver; (iii)

connect the equipment into an outlet on a circuit different from that to which the receiver is connected. If necessary, the user should

consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet

prepared by the FCC helpful: "How to Identify and Resolve Radio/Television Interference Problems". This booklet is available from

the U.S. Government Printing Office, Washington, D.C. 20402, Stock # 004-000-00345-4.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC:160A-HS2LCDWF The term IC before the

radio certification number signifies that the Industry Canada technical specifications were met.

The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any

misuse of the trademarks is strictly prohibited and Tyco International Ltd. will aggressively enforce its intellectual property rights to

the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. All trademarks not owned by Tyco

International Ltd. are the property of their respective owners, and are used with permission or allowed under applicable laws. Product

offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all

features. Availability varies by region; contact your sales representative.

• www.dsc.com • Tech. Support: 1-800-387-3630 (Canada, US), 905-760-3000 • Printed in Canada