Anslut 004916 Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Anslut 004916. Anslut 004916 20 stron. Floor fan

Timer function

Enable/disable the timer function by pressing

TIMER on the remote control or the control

panel. Press to change the set time from 0.5

to 8 hours in steps of 0.5. The corresponding

status light on the top of the fan goes on.

Normal mode/sleep mode

Press MODE once to enable natural mode

(NT). In this mode the fan speed increases

or reduces automatically.

Press MODE again to enable sleep

mode (SL). In this mode the fan speed is

reduced. Press MODE again to return to

normal mode (NM). The corresponding

status light on the top of the fan goes on.

Adjust display brightness

Press MODE for three seconds to adjust the

brightness of the display.

NOTE:

Pull out the plug before installation and/or

cleaning.

•

Clean the fan with a soft cloth moistened

with a mild detergent. Make sure that no

water or other liquid gets into the fan.

•

Do not use petrol, solvents or detergents

that can damage the plastic parts.

Replacing the battery

Press in the catch and open the battery

flap.

Insert the battery with positive terminal up.

Only use batteries of the recommended

type.

Push in the battery flap on the remote

control.