Anslut 008733 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Światło robocze Anslut 008733. Anslut 008733 11 stron. Work lamp
Drukuj stronę
EN
SAFETY INSTRUCTIONS
• Do not look directly into the
light when it is switched on.
• Never point the beam at the
eyes of people or animals.
• Store out of the reach of
children.
• Can be used indoors and
outdoors, but do not immerse
in water or any other liquid.
• Do not charge the product
outdoors – this will not
comply with protection
rating IP65.
• Do not use the charger to
charge other products.
• Only use the supplied
charger to charge the lamp.
• The switch must be in the off
position during charging,
otherwise this can damage
the light.
• Never cover the lens or
reflector when in use.
• Do not attempt to replace
the battery.
• The product must be
discarded if the glass front is
cracked.
10
• The LED light source is not
replaceable. When the light
source has reached the end
of its useful life the complete
product must be replaced.
SYMBOLS
Read the instructions
before use.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Battery
Output
Protection rating
Luminous flux
Charging time
Run time
Operating temperature
USE
HOW TO USE
•
Tap the switch to switch the light on and
off.
FIG. 1
•
Use the built-in hanger for storage, or to
keep both hands free. The hook pulls out
and can be turned.
FIG. 2
3.7 V/2200 mAh
6 W
IP65
360 lm
4 h
Max 2 h
-10–40°C