Anslut 013465 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Światło robocze Anslut 013465. Anslut 013465 13 stron. Work lamp
Drukuj stronę
FIG. 2
FIG. 3
FIG. 4
USE
CHARGING THE PRODUCT BATTERY
1.
Open the transparent lid on the back.
2.
Insert a USB cable in the 5 V port and
connect the other end of the cable to a
mains adapter or computer.
3.
The charge indicators show the battery
charge status. Three blue indicators are
shown when the battery is fully charged.
CHARGING BATTERY OF EXTERNAL
UNIT
Insert a USB cable in the 5 V port on the back
of the lamp and connect the other end of the
cable to a mobile phone, camera or other
external device.
WARNING!
Never connect external units at the same
time as the power source is connected for
charging.
HOW TO USE
Switching on and switching off
spotlight
Tap the button "4" to switch the light on
and off. There are three light modes: full
brightness, half brightness and flashing.
Connection of Bluetooth® device
1.
Press the button "6" until there is an
audio prompt.
2.
The speaker can now be connected and
play music from a mobile phone, tablet or
other mobile audio device.
3.
Press the button again to switch off.
Adjusting the volume
1.
Press the button "7" to increase the
volume.
2.
Press the button "5" to lower the volume.
Browsing in play list
1.
Tap the button "7" to go to the next track.
2.
Tap the button "5" to go to the previous
track.
MAINTENANCE
Wipe the product with a dry, soft cloth when
necessary.
STORAGE
•
Store the product out of the reach of
children, in a stable and safe position,
cool and dry. Avoid very hot or low
temperatures.
•
Protect the product from direct sunlight.
If possible, store the product in the dark.
•
Do not store the product in a plastic bag,
this can cause the accumulation of
moisture and damage the product.
EN
13