Foxfury Lighting Solutions RUGO 700-300 Instrukcja obsługi produktu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi produktu dla Sprzęt oświetleniowy Foxfury Lighting Solutions RUGO 700-300. Foxfury Lighting Solutions RUGO 700-300 14 stron.
Drukuj stronęREASSEMBLING THE RUGO
1.
1
Install the Power Pack to the Light Head—confirm position of alignment
posts to their respected cavities.
2.
2
Push both halves together. A 'click' should be heard as they become
locked together.
Test the light to make sure that the Power Pack is properly connected
to the Light Head by pressing the Power/Mode Switch.
POWER PACK LIFE
MODE
HIGH
MEDIUM
LOW
DIM
*Power Pack life may vary according to age and ambient conditions.
OPERATIONAL MODES
ON/DIM mode: Press the Power/Mode Switch once.
LOW mode: From DIM mode, press the Power/Mode Switch once.
MEDIUM mode: From LOW mode, press the Power/Mode Switch once.
HIGH mode: From MEDIUM mode, press and hold the Power/Mode
Switch once.
OFF: From ANY mode, press and hold the Power/Mode Switch for 2 sec.
LOW POWER INDICATOR: At a low level, the Charge Indicator will flash
for approximately 0.5–1.0 sec. It is suggested that you then charge or
replace the Power Pack with a fully charged one. If on a higher mode and
you need to continue using the light, it is suggested that you adjust the
mode to a lower setting.
NOTE: The light does not retain the mode in memory . Once you turn the light
ON, you will have to re-select the mode you desire.
6
AFTER CHARGING
™
DURATION
1 hour
1.5 hours
3.5 hours
6.75 hours
LUMENS
700
400
200
70