Anslut 002-652 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Światło powodziowe Anslut 002-652. Anslut 002-652 12 stron. Led floodlight

Drukuj stronę
Anslut 002-652 Instrukcja obsługi
1
2

OPERATION

Charge the battery prior to initial use
2
Spotlight
(see BATTERY CHARGING)
1
1. LED light
1
Press the switch
Spotlight
Tube light
(OR place the orange lens cover on the COB tube light for
Retractable
warning blinking light)
tripod stand
2. USB power bank
Remove the back cover
Connect the device '
output port
4
for charging.
1
Orange lens cover

BATTERY CHARGING

Before recharging the battery, turn the power lock
position.
Connect the USB power cord to AC charger and insert the
other end of cord plug into the micro USB port
unit, then plug the AC charger into any standard electrical
outlet.
Connect the USB power cord to car plug charger and insert
the other end of cord plug into the micro USB port
unit, then plug the car plug charger into the cigarette lighter
socket on your car.
The red LED charging indicator will turn on to indicate
charging, the green LED will be on as the battery is fully
charged.
The time required to fully charged the battery around 7 hours
for both AC charger and car plug charger.
- Do not completely discharge the battery before
recharging, as over discharge will decrease the
battery life.
Notes
- To ensure the battery will not be fully exhausted
when the unit is not in use or in storage, recharge
1
to select the desired operation mode.
Blinking
3
by turning it anticlockwise.
2
s USB power cord into the USB
KB2601A
4
Tube light &
Blinking light
Off
3
3
4
4
5
Hook
2
2
1
to OFF
of the
3
3
of the
unit, then plug the AC charger
outlet.
Connect the USB power cord
the other end of cord plug into
unit, then plug the car plug cha
socket on your car.
The red LED charging indicato
charging, the green LED will b
charged.
The time required to fully charg
for both AC charger and car p
- Do not completely d
recharging, as over
battery life.
Notes
- To ensure the batte
when the unit is not
the battery every 3

SPECIFICATIONS

Battery
: 3.7V 2400mAh Li-i
LED
: 10 Watt Cree XM-L
Charger : - 5V 500mA AC ch
(Rated Power Inp
Rated D.C. Outp
Rated DC Outpu
- 12V DC car plug