DSC Escort5580 Voice Assisted Security Control Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Jednostka sterująca DSC Escort5580 Voice Assisted Security Control. DSC Escort5580 Voice Assisted Security Control 17 stron. Voice assisted security control
Drukuj stronę
If the alarm was unintentional, notify your monitoring station and/or the local authorities
immediately to prevent an unnecessary response.
You can determine the source of an alarm by following the instructions in the "Alarm Memory"
section of this manual. Once the source of the alarm has been corrected, your system can be
armed again.
Alarm Memory
Your system will record in its memory alarms that occurred while the system was armed. If an alarm
occurred while the system was armed, the system will announce this message when the system is
disarmed:
"There are {number} alarms in memory, Zones {number}"
"There are {number} alarms in memory, Zones {number}"
"There are {number} alarms in memory, Zones {number}"
"There are {number} alarms in memory, Zones {number}"
"There are {number} alarms in memory, Zones {number}"
To review the Zones that went into alarm, press [ ]. The system will announce
Press [3] and the system will indicate the zones in Alarm Memory with messages similar to the
following:
"There are {number} alarms in memory, Zones {number}.
"There are {number} alarms in memory, Zones {number}.
"There are {number} alarms in memory, Zones {number}.
"There are {number} alarms in memory, Zones {number}.
"There are {number} alarms in memory, Zones {number}.
When finished reviewing the zones in alarm memory, press the [#] Key to return to the other system
status messages.
6
"For Alarm Memory press [3]"
"For Alarm Memory press [3]"
"For Alarm Memory press [3]"
"For Alarm Memory press [3]"
"For Alarm Memory press [3]"
To exit press [#]"
To exit press [#]"
To exit press [#]"
To exit press [#]"
To exit press [#]"