DSC WS4916 Series Instrukcja instalacji i obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Alarm dymowy DSC WS4916 Series. DSC WS4916 Series 9 stron. Wireless smoke deteçtér
Również dla DSC WS4916 Series: Instrukcja instalacji i obsługi (4 strony), Instrukcja instalacji i obsługi (8 strony), Instrukcja instalacji i obsługi (8 strony), Podręcznik użytkownika i instrukcje instalacji (17 strony), Instrukcja instalacji i obsługi (8 strony)
Drukuj stronę
Limited Warranty
Digital Security Controls warrants that for a period of twelve months from the date of pur-
chase, the product shall be free of defects in materials and workmanship under normal use
and that in fulfillment of any breach of such warranty, Digital Security Controls shall, at its
option, repair or replace the defective equipment upon return of the equipment to its repair
depot. This warranty applies only to defects in parts and workmanship and not to damage
incurred in shipping or handling, or damage due to causes beyond the control of Digital
Security Controls such as lightning, excessive voltage, mechanical shock, water damage, or
damage arising out of abuse, alteration or improper application of the equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of
any and all other warranties, whether expressed or implied and of all other obligations or lia-
bilities on the part of Digital Security Controls. Digital Security Controls neither assumes
responsibility nor authorizes any other person purporting to act on its behalf to modify or to
change this warranty, nor to assume for it any other warranty or liability concerning this
product.
In no event shall Digital Security Controls be liable for any direct, indirect or consequential
damages, loss of anticipated profits, loss of time or any other losses incurred by the buyer in
connection with the purchase, installation or operation or failure of this product.
Smoke Detectors: Smoke detectors that are a part of this system may not properly alert
occupants of a fire for a number of reasons, some of which follow. The smoke detectors may
have been improperly installed or positioned. Smoke may not be able to reach the smoke
detectors, such as when the fire is in a chimney, walls or roofs, or on the other side of closed
doors. Smoke detectors may not detect smoke from fires on another level of the residence or
building.
Every fire is different in the amount of smoke produced and the rate of burning. Smoke
detectors cannot sense all types of fires equally well. Smoke detectors may not provide
timely warning of fires caused by carelessness or safety hazards such as smoking in bed,
violent explosions, escaping gas, improper storage of flammable materials, overloaded elec-
trical circuits, children playing with matches or arson.
Even if the smoke detector operates as intended, there may be circumstances when there is
insufficient warning to allow all occupants to escape in time to avoid injury or death.
Warning: Digital Security Controls recommends that the entire system be completely tested
on a regular basis. However, despite frequent testing, and due to, but not limited to, criminal
tampering or electrical disruption, it is possible for this product to fail to perform as
expected.
1175
DSC, Toronto, Canada
2006
1175-CPD-001
©2006 Digital Security Controls
Toronto, Canada • www.dsc.com
Tech Support: 1-800-387-3630 (Canada & USA), 905-760-3036
Printed in Canada
Important Information: Changes or modifications not expressly approved by Digital Secu-
rity Controls could void the user's authority to operate this equipment.
FCC Compliance Statement
CAUTION: Changes or modifications not expressly approved by DSC could void your
authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used
properly, in strict accordance with the manufacturer's instructions, may cause interference to
radio and television reception. It has been type tested and found to comply with the limits
for Class B device in accordance with the specifications in Subpart "B" of Part 15 of FCC
Rules, which are designed to provide reasonable protection against such interference in any
residential installation. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to television or radio recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that alarm control and receiver are on
different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician
for additional suggestions. The user may find the following booklet prepared by the FCC
helpful: "How to Identify and Resolve Radio/Television Interference Problems". This book-
let is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock #
004-000-00345-4.
Industry Canada Compliance Statement: This Class B digital apparatus meets all require-
ments of the Canadian interference-causing equipment regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le
matériel brouilleur du Canada.
IC:160A - WLS916NB
The term "IC:" before the radio certification number only signifies that Industry Canada
technical specifications were met.
EN54-5 (2000) Class A1
EN54-7 (2000)
Point type smoke and heat detector