DSC neo HS2016 Podręcznik referencyjny

Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla Ekran dotykowy DSC neo HS2016. DSC neo HS2016 2 stron. Zone attributes

NEO HS2016 / HS2032 / HS2064 / HS20128 v1.3

Zone Attributes

The following information describes the zone attribute programming options. To modify the zone

attributes, first enter into Section [002] and then enter into the SubSection {001 – 128} (the 3

digit zone number.) After modifying the zone attributes as needed, press the # key and enter the

next zone number (SubSection) if additional zones need to be modified; or the # key a second

time to your solid red light.

Section [002] – Zone Attributes

Zone attributes are used to customize the operation of the independent zones. When a zone

type (Section [001]) is programmed, the default zone attribute is automatically assigned. See

the Reference Manual for the default attribute settings for each zone type.

Note: These attributes allow you to override the default settings. DO NOT change any fire zone

attributes from their default settings.

SubSection {001 – 128}

Note: The attributes listed below can be enabled and disabled for each zone independently.

01 – Bell Audible

ON: An alarm activates the siren.

OFF: Silent alarm.

02 – Bell Steady

ON: Siren output is steady when in alarm.

OFF: Siren output pulses when in alarm.

03 – Door Chime

ON: The keypad chimes when the zone is open and/or when the zone is secured.

OFF: The zone does not chime.

04 – Bypass Enabled

ON: The zone can be manually bypassed.

OFF: The zone cannot be bypassed.

Note: Bypass shall not be enabled for fire zones.

05 – Force Arm

ON: The system can be armed with the zone open. The zone is temporarily bypassed,

and when secured, is monitored by the system.

OFF: The system cannot be armed if the zone is open.

NEO – Zone Attributes

1 of 2

April 2018