DSC ELECTRONICS DP-M Series Podręcznik użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zasilanie DSC ELECTRONICS DP-M Series. DSC ELECTRONICS DP-M Series 16 stron. High power laboratorypowersupplies
Drukuj stronęDP-M Series User's Manual
Version 12.11.2021
3.3 Inductive load
Note: Can be ignored for devices with optional passive reverse current protection.
If the power supply is used with large inductive loads, voltage spikes with an amplitude of up to 5 times the output
voltage can occur, this may damage the power supply or lead to unstable operation. To protect the power supply from
damage, a freewheeling diode has to be used in parallel with the load.
3.4 Switches
If a mechanic switch is used to connect or disconnect the power supply from the load, electric discharge can occur
during switching on currents over 100A. This may cause unstable output. To prevent this behaviour, connect a RC
circuit to the switch contact point.
4. Front Panel Description
1
Power switch
2
Display meter
No.
Name
1
V-set
2
I-set
3
Preset
4
OV-set
5
OI-set
6
OK
7
ADDR
8
BAUD
9
ON/OFF
←
10
→
11
12
Lock
Description
Press to enter output voltage setup mode.
Press to enter output current setup mode.
Press to enter or exit preset voltage/current mode.
Press to enter over voltage setup mode.
Press to enter over current setup mode.
Press to confirm the input value.
Press to enter address setup mode.
Press to enter baud rate setup mode.
Press to turn on or off the output.
Press to move cursor to the left.
Press to move cursor to the right.
Press to lock front panel buttons.
DSC-Electronics Germany • Georgstraße 36 • 53111 Bonn
DSC-Electronics Germany • Georgstraße 36 • 53111 Bonn
3
Function keys
4
Adjustment knob