DSE DK-SF1-CSC Podręcznik użytkownika
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Aparat cyfrowy DSE DK-SF1-CSC. DSE DK-SF1-CSC 3 stron. Camera with wifi dvr
Drukuj stronę
8V ERWP EX IH J V SQ - X EP M ER X S )RKP M WL [ [ [ SRP M RIHSGX V ERWP EX SV GSQ
USER'S MANUAL
DK-SF1-CSC
Camera with WiFi DVR
Product description
DK-SF1-CSC is a video recorder with an integrated
camera hidden in a fake smoke detector to be mounted on
the ceiling.
1.
Adjustable lens with inclination from 0 to 15 °
2.
Invisible infrared illuminator
3.
Microphone
4.
PIR motion detector
5.
Brightness sensor
6.
Speaker
7.
USB port for power supply
Access the battery compartment
To access the internal battery compartment, the mounting
base must be rotated clockwise until it is released from
the sensor
DK-SF1-CSC Camera with hidden video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
Document: DK-RT1-CSC 2H1
8. Camera power switch
9. Reset button
Pressed 4 sec. First double beep = WiFi configuration
Pressed 6 sec. Second double beep = Factory reset
10. Micro SD card slot
11. WiFi status indicator
Flashing blue = WiFi configuration mode,
Solid blue = Waiting for wifi configuration
Off = Wifi connected)
12. Charging indicator (solid red while charging | off when
charging is complete.
13. 2 Batteries as standard. You can possibly add 2 more
batteries to be purchased separately.
Audio
This camera is equipped with a microphone for ambient
listening and a built-in speaker thanks to which you can
communicate with people close to the camera by pressing
the app buttons.
Infrared illuminator
This camera is equipped with an invisible infrared
illuminator for night vision in absolute darkness. The
illuminator turns on by itself if the ambient light does not
allow for color shooting. Through the control app you can
possibly force the day mode (always shooting in color) or
night (always shooting B / W).
Battery powered with PIR
The camera is able to operate with only the power supply
of its own internal batteries. It is equipped with a PIR
presence detector which allows it a very long autonomy.
Factory supplied with 2 2600 mAh 18650 batteries each
that allow up to 1 year of autonomy in Stand-by, in the
absence of motion detections. If you want, you can buy
two additional batteries separately to be inserted in the
free slots to double the autonomy.
Charging the battery
Before using the device, it is advisable to fully charge the
battery. To do this, connect the USB port of the camera to
the computer or to a USB socket charger (not included)
using the cable supplied.
The complete recharge of the 2 standard batteries takes
about 12 hours depending on the initial state of charge.
The charge LED lights up red during charging and turns off
when charging is complete.
Page: 1