DSE DK-PV500LW Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla DVR DSE DK-PV500LW. DSE DK-PV500LW 5 stron. Portable digital video recorder

OWNER'S MANUAL

Tap SAVE to save the new setting

By this time the DVR stops generating its own wifi network and connects to your WiFi network.

Wait a few minutes, to allow the restart of the DVR, and then controls the LED on the DVR. You

should see the orange LED is off, then the DVR is not creating its own network wifi ..

Turn on wifi pressing the POWER (13). You'll see the green LED light up which means that your

DVR is now connected to your wireless network

You can now return to the wifi on your phone settings, and see that the wifi network DVR is no

longer available. Probably your phone you will already be reconnected to your wifi network.

Now you can re-open the application and you will find your DVR ONLINE again, but this time

reached over the Internet.

If for any reason it becomes necessary to restore the factory settings, you can act in the APA

configuration menu or press and hold the button in the hole 7.

If you press the 7 button for 4 seconds you'll get the restoration of the password 88888888 in the

direct wifi. If you press the 7 button for 10 seconds you'll get the total factory reset the DVR.

Checking the DVR by APP

DSE srl - Digital Surveillance Equipment - www.dse.eu

Document: 1N7 DK-PV500LW

DK-PV500LW Portable Digital Video Recorder

With your phone you can carry out all the checks and DVR configuration

CHOOSE DVR

REVIEW AND DISCHARGE

START RECORDING.

Start Recording

The DVR allows you to start recording in different ways, some of which have already been

described.

Automatic Start recording

The DVR will start recording automatically part in the continuous or motion as programmed.

Start recording with REC,

And 'possible to start and stop recording by pressing the REC button (12) on the DVR.

Start recording by APP

You can start recording from APP. It starts recording by tapping REC. Through the APP you can

choose your DVR recording mode.

NORMAL - Press this button if you want your DVR to record continuously. If you press the

SETUP button on the screen you can enable the Overwrite option to overwrite the oldest video

once run out of space in memory.

MOTION - Press this button if you want your DVR to record only in the case of movements

objective. Of course you can use this function

Page: 4

CONFIGURATION

front