ADDAC System ADDAC307 Heart Sensing Instrukcja montażu - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Syntezator ADDAC System ADDAC307 Heart Sensing. ADDAC System ADDAC307 Heart Sensing 10 stron.
Drukuj stronę
ADDAC307 Assembly Guide
STEP 3:
Place and solder the 2x5 boxed power header like shown below.
STEP 4:
Next pick up the top pcb.
Locate and solder the 2x3 female connector like shown below.
STEP 5:
Locate the screws and spacers and place them like shown below, please note the plastic screw goes on
the bottom hole.
ADDAC SYSTEM
page 4