DSPeaker Anti-Mode X2 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt sieciowy DSPeaker Anti-Mode X2. DSPeaker Anti-Mode X2 12 stron.
Drukuj stronę
Home Screen
Home Screen is the default view of the user interface. It indicates the selected input and volume. An
alternative view displays the current sampling rate for the digital audio sources (or three dots for
unspecified rate) and a signal level indicator. To select the alternative view, press
remote controller. To select the default view, press
In the default view, the volume level is displayed as decibel attenuation. "00"
represents the maximum and "-70" represents the smallest value possible.
Please note that use of tone controls (or mismatch in detected speaker levels)
may result in reduced maximum volume available.
In the alternative view example, "C" indicates the coaxial input, "96" indicates
96kHz rate. If all 10 dots in the signal level bar are lit, the signal is at maximum
level. Each dot represents 3 dB. If no dots are lit, the signal level is -30 dB or
lower.
Selecting Input
g
h
Use
and
to select the active input. This function is available in the home screen. The selected
input becomes active when the unit returns to the home screen.
Abbreviation
Mnemonic
A
ANA
O
OPT
C
COX
U
USB
Adjusting Volume
f
e
Use
and
to adjust volume. This function is available in the home screen.
b
Press
to mute the output. Press any button to return to normal volume.
Standby
a
switches the unit from active to a low-power stand-by state and vice versa.
Rev. 1.1
i
Full Name
Analog stereo input
Optical S/PDIF (Toslink) up to Stereo 192kHz / 24 bits
Coaxial S/PDIF up to Stereo 192kHz / 24 bits
USB Audio (USB-C) Stereo PCM 48kHz or 96kHz / 24 bits
2022-08-10
h
and
.
A
-M
TM
X2
NTI
ODE
U
'
G
SER
S
UIDE
i
g
and
on the
Page 6 (12)