Attacus Obeat 1 Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor pracy serca Attacus Obeat 1. Attacus Obeat 1 2 stron. Optical heart rate armband
Product Warranty
We thank you for purchasing
manufacturer's warranty from the date of purchase.
Warranty period:
We provide repair service free of charge but such service will be limited to normal use only.
Any damage caused by misuse of users shall not be covered by the warranty hereof.
1) We offer a risk free 90 day warranty on all replacement parts that we offer for you.
2) User will pay for postage of replacement products from home to our service center.
(Please pack properly)
Non-Warranty Repair Policy: (User needs to pay for the repairs.)
1) If malfunction or damage is caused by improper use, disassembly and modification.
2) If damage is caused by accident, abuse, misuse, flood, fire, earthquake, any other natural
disasters or human negligence.
3) Due to normal wear and tear of consumptive parts such as battery, armband, etc.
4) If any serial number has been removed or defaced.
5) If it is damaged after the warranty expires.
OPERATION
The sensor only comes with one button; the operation of different uses is described
as follows:
Charge
Button
Charging
Fully charged
Low battery
Note 1
When used as an independent training device
Turn on and Start Recording
Long press
Stop Recording and Turn off
Long press
Manual lap
Press once
Light Indicate of heart rate
Heart rate not detected
Heart rate detected
Note 2
Synchronizing Data
Note 3
Turn on and Synchronizing
Press once
Stop Syncing and Turn off
Press once
Notes
1. The red light flashes when the power is turned on, indicating that the battery is low.
2. Once the heart rate is detected, the LED lights will indicate different heart rate zones through different colors.
Heart Rate Zone*
Training Intensity %
%MHR
%HRR
~50
~55
Daily Life
<Z1
50~60
55~60
Warm Up
Z1
60~70
60~65
Fat Burn
Z2
70~80
65~75
Z3
Aerobic
80~90
75~85
Anaerobic
Z4
90~
85~
Z5
Maximum Effort
* The sensor will define your heart rate zone according to the age and Maximum Heart Rate (%MHR) or Heart Rate Reserve
(%HRR) input in Ala Connect.
3. You can transfer the recorded data to Ala Connect
Ala Connect via Bluetooth
you changed on Ala Connect
Ala Connect to the sensor. Once the synchronization is completed, press the button
4. The sensor will automatically turn off for power saving after 10 minutes of no action or connection.
5. Press and hold the button
Press and hold the button for more than 8 seconds at any time/mode will restarted the sensor (with white light
on indicating synchronization mode). If you would like to record an exercise, please turn it off with a single
press, and then press and hold
press
press and hold until the red light is on.
SPECIFICATIONS
• Model: OB001
• Dimension: L 48×W 31.5×D 12.5mm
• Armband: See package for size 380×25mm or
• Weight: 13 g (armband excluded)
• IP rating: IPX7
• Memory capacity: Up to 25 of hours training. (Single recording file up to 13 hours)
• Operating temperature: -10~60°C (-14~140°F)
• Charge temperature: 10~45°C (50~113°F)
products. ATTACUS provide a one-year
Green
Red
Flash
Constant ON
Flash
Light up
Light up
Constant ON
LED
Training Functions
Indicator
Blue
Facilitate warm-up and energy recovery
Aqua
Improve metabolism
Green
Enhance aerobic fitness
Yellow
Increase speed and lactate threshold
Orange
Anaerobic. Sprinting pace; unsustainable for a long
Red
period of time
wireless technology. Or syncing the settings
®
press the button to turn off.
260×25mm
Obeat1
OB001
Model
SN:
Serial No.
(The serial number is printed directly on the back of device.)
Dealer's Stamp
HOW TO CLEAN
• The sensor is water-proofed. You can clean it with water; be sure to dry it with cloth
immediately after washing it.
• It is recommended to wash the armband with water (under 40°C). DO NOT use the
White
brightener, soap or softener. DO NOT soak, iron, dry clean, bleach and twist.
FCC
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following
two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the Federal Communications Commission (FCC)
rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
Light up
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
Light up
equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by doing one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
MPE
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to provide
a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter.
a single
• Wireless transmission interface: Bluetooth®, ANT+
• Wireless transmission frequency: 2.402~2.480 GHz
• Battery: rechargeable lithium battery
• Input voltage: 5V
• Run time: 40 consecutive hours (max.)
• In the box: Sensor, Armband, Charging dock, GPT instruction card,
Operation guide.
Optical Heart Rate Armband
Date of purchase
YYYY
/
O B 0 0 1
Customer Service
(only applicable in Taiwan)
ADD
39F., No.758, Jungming S. Rd.
Taichung City 40255, Taiwan
TEL
+886-0800-608341
Manufacturer
Zhejiang ALA Fitness Technology LTD.
Zhejiang ALA Fitness Technology LTD.
ADD
No.405 Tongxin Road,
Tongxiang Economic Development Zone,
Zhejiang, China
TEL
+86-573-8862 8666
MM
/
DD