3One data IES2010-2GS-4F Instrukcja instalacji sprzętu - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Router sieciowy 3One data IES2010-2GS-4F. 3One data IES2010-2GS-4F 5 stron. Unmanaged industrial ethernet switch
Drukuj stronę100BaseFX port
100Base-FX full-duplex SM or MM port , SC/ST type .The fiber port must be used in pair, TX (transmit) port connect remote switch's RX(receive)
port; RX(receive) port connect remote switch's TX(transmit) port.
The optical fiber connection supports the line to instruct enhance the reliability of network effectively
Suppose: If you make your own cable, we suggest labeling the two sides of the same line with the same letter (A-to-A and B-to-B, shown as below, or
A1-to-A2 and B1-to-B2).
【LED indicator】
LED indictor light on the front panel of IES2010-2GS-4F Series .the function of each LED is described in the table as below.
System Indication LED
LED
PWR
（green）
Link
（green）
Each RJ45 has two LED indicator
10M/100M
（green）
Link/ACT
（green）
【Power Input】
IES2010-2GS-4F Ethernet switch provides 4 bits industrial terminal blocks （V1-、 V1+、 V2-、 V2+） ， V-、 V+ is 12VDC～48VDC power input.
State
Description
ON
Power is being supplied to
power input PWR input
OFF
Power is not being supplied to
power input PWR input
ON
FX port is active
OFF
FX port is inactive
Blinking
Data is being transmitted
ON
100M work mode
（100Base-TX）
OFF
10M work mode（10Base-T）
ON
Network connection is active
Blinking
Network is running
OFF
Network connection is not
active
.