Attero Tech AXON D2FLEXio Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający Attero Tech AXON D2FLEXio. Attero Tech AXON D2FLEXio 11 stron. Dual analog flex i/o networked audio interface

Drukuj stronę
1

– Overview

Figure 1 - D2FLEXio Front Panel
The D2FLEXio provides cost effective analog audio connectivity
for installed AV systems.
Each analog audio I/O features an installer selectable switch to
assign input or output audio connectivity.
802.3af PoE powered with the option of a local DC supply in cases
where PoE power is not available. Simple analog gain trim pots
are provided for proper gain staging with pro or consumer line
level audio equipment.
This flexibility provides a single product solution for cost
effective analog audio conversion to and from any Dante™ or
AES67 system.
Figure 2 - D2FLEXio Rear Panel
1.1 – What's in the Box
The unA6IO comes supplied with the following
D2FLEXio device (P/N: 900-00225-01)
o
1.2 – Optional Extras
The following are available as options for the unA6IO and that
may be ordered separately:
A 24 V DC power supply is available if PoE power is not
o
desired or available – P/N: 900-00175-01
The D2FLEXio is
1315 Directors Row Suite 107 Fort Wayne, IN 46808 ⁞ (260)496-9668 ⁞ www.atterotech.com
2

– Device Installation

Figure 3 - Product Overview
ID
Description
1
I/O Mode selection switch
2
Input Pad Control
3
Output Gain Control
4
Balanced Audio I/O (based on Mode selection)
Dante™/AES67 Ethernet interface connector and
5
indicators
6
DC Input – Use with optional 24 V DC wall wart only
7
Status LED
*Note: The D2FLEXio has a label on one of the mounting flanges
that shows the MAC address. This is important for initial device
identification as the last 6 digits make up part of the devices
default network name that is shown when the device is detected
by Dante™ Controller. The full MAC address is also given on the
bottom of the unit
Page 2