2B Technologies 306 Instrukcje uruchamiania - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje uruchamiania dla Przyrządy pomiarowe 2B Technologies 306. 2B Technologies 306 4 stron.

Alternative Installation: Pushing flow from the Model 306.

For some applications, the customers may want the Model 306 to push into a chamber or other

type of passive equipment that does not actively pull or push flow. In the case that the equipment

is not very restrictive and is near ambient pressure, the Model 306 may provide enough flow (up to

~ 1 L/min) and will not need any additional modification. If more flow is needed (up to ~ 3 L/min)

or the chamber/equipment is fairly flow-restrictive, a needle valve can be installed on the outlet of

the internal overflow scrubber (see Figure 2). Adjustment of the needle valve will control the

portion of flow that is vented inside the box and the portion that is directed to the outlet.

Suggestions for Measuring the Flow to the User's Equipment

If the user wants to measure the flow rate delivered to their equipment, we suggest they use one

of the following methods:

1. Use a flow meter on the internal overflow scrubber to measure the vented flow rate and

read the total flow rate from the Model 306. The flow to the user's equipment is the

difference between these two measurements.

2. Use a scrubber after the user's equipment and then a flow meter. This allows for direct

measurement of the process flow, but may pressurize the process if the scrubber or flow

meter is restrictive. Ozone must be destroyed in the gas stream using a scrubber to

prevent damage to the user's flow meter.

Ozone Generator

Figure 2. Photograph of the Model 306 showing where a needle valve

can be installed to increase the flow or pressure at the outlet.

2B Technologies

2100Central Ave Suite 105, Boulder, Colorado 80301 USA

Phone 303-273-0559 Fax 303-277-1812 http://www.twobtech.com

Place to install a needle

Internal

valve for increasing the

Overflow

outlet flow or pressure

Scrubber

Outlet

Model 306 Quick Start Guide Rev B